#
# ftp.us.kernel.org:/pub/software/admin/mon
# http://www.kernel.org/software/mon/
#
# ftp://ftp.spu.edu/pub/CPAN/modules/01modules.index.html
#
# =============
# Documentation
# =============
#	more README
#	nroff -man doc/mon.1
#
#
# Requirements
# ------------
#	perl -v		"mon" daemon uses Perl 5.n, where n >= 004_04.
#	Time::Period module	available from CPAN archive (http://www.perl.com/perl)
#
#  To use "telnet.monitor" and "tcp.monitor":
#	you'll need to patch the satan-1.1.1 distribution. Patches
#	are available from ftp://sunsite.unc.edu/pub/Linux/system/network/admin.
#
#
Maggie:/usr2/ftp/linux-consulting.com/pub/Src# tar ztvf ../Downloads/Networking/Monitoring/mon-0.37l.tar.gz
#
#
Maggie:/usr2/ftp/linux-consulting.com/pub/Src/mon-0.37l# mon -p 80  planet.fef.com
	===========================
	Can't locate Time/Period.pm in @INC (@INC contains: /usr/lib/perl5/i386-linux/5.00404
	===========================
	/usr/lib/perl5 /usr/lib/perl5/site_perl/i386-linux /usr/lib/perl5/site_perl .)
	at ./mon line 33.
	BEGIN failed--compilation aborted at ./mon line 33.

#
# Try to fix Time::Period
# -----------------------
#
Maggie:/usr2/ftp/linux-consulting.com/pub/Src/mon_TimeModules# tar zxvf Period-1.20.tar.gz 
Maggie:/usr2/ftp/linux-consulting.com/pub/Src/mon_TimeModules# tar zxvf Time-Beat-1.00.tar.gz
Maggie:/usr2/ftp/linux-consulting.com/pub/Src/mon_TimeModules# tar zxvf Time-HiRes-01.20.tar.gz 
Maggie:/usr2/ftp/linux-consulting.com/pub/Src/mon_TimeModules# tar zxvf Time-modules-98.112901.tar.gz 
Maggie:/usr2/ftp/linux-consulting.com/pub/Src/mon_TimeModules# tar zxvf TimeDate-1.08.tar.gz 
#
#
Maggie:/usr2/ftp/linux-consulting.com/pub/Src/mon_TimeModules/Period-1.20# perl Makefile.PL
Maggie:/usr2/ftp/linux-consulting.com/pub/Src/mon_TimeModules/Period-1.20# make
Maggie:/usr2/ftp/linux-consulting.com/pub/Src/mon_TimeModules/Period-1.20# make install
#
#
# try mon again
# -------------
#
Maggie:/usr2/ftp/linux-consulting.com/pub/Src/mon-0.37l#  mon -p 80  planet.fef.com
	Can't locate stdarg.ph in @INC (did you run h2ph?)
	BEGIN failed--compilation aborted at ./mon line 35.

#
Maggie:/usr2/ftp/linux-consulting.com/pub/Src/mon_TimeModules/Time-Beat-1.00# perl Makefile.PL
Maggie:/usr2/ftp/linux-consulting.com/pub/Src/mon_TimeModules/Time-Beat-1.00# make 
Maggie:/usr2/ftp/linux-consulting.com/pub/Src/mon_TimeModules/Time-Beat-1.00# make install
#
Maggie:/usr2/ftp/linux-consulting.com/pub/Src/mon_TimeModules/Time-HiRes-01.20# perl Makefile.PL 
Maggie:/usr2/ftp/linux-consulting.com/pub/Src/mon_TimeModules/Time-HiRes-01.20# make test
#
#
Maggie:/usr2/ftp/linux-consulting.com/pub/Src/mon_TimeModules/Time-modules-98.112901#  perl Makefile.PL

Maggie:/usr2/ftp/linux-consulting.com/pub/Src/mon_TimeModules/Time-modules-98.112901# make test
Maggie:/usr2/ftp/linux-consulting.com/pub/Src/mon_TimeModules/Time-modules-98.112901#  make install
#
#
Maggie:/usr2/ftp/linux-consulting.com/pub/Src/mon_TimeModules/TimeDate-1.08# perl Makefile.PL 
Maggie:/usr2/ftp/linux-consulting.com/pub/Src/mon_TimeModules/TimeDate-1.08# make test
Maggie:/usr2/ftp/linux-consulting.com/pub/Src/mon_TimeModules/TimeDate-1.08# make install
#
#
# try mon again
# -------------
#
Maggie:/usr2/ftp/linux-consulting.com/pub/Src/mon-0.37l#  mon -p 80  planet.fef.com
	Can't locate stdarg.ph in @INC (did you run h2ph?)
	BEGIN failed--compilation aborted at ./mon line 35.
#
# ===================================================================================================
#
#
# From dejanews.com search for: stdarg.ph
#
# Do you have a /usr/include/stdarg.h and do you have a stdarg.ph in your Perl library directories? 
# If the answers are yes and no, are you sure you ran h2ph on everything?
#
#
# You (or your sysadmin, whoever) probably didn't run 'h2ph' after installing Perl.  If you go back
# and look at the INSTALL file included in the Perl source distribution, you'll see this little note
# right at the very top:
# 
#   # You may also wish to add these:
#   (cd /usr/include && h2ph *.h sys/*.h)
#   (installhtml --help)
#   (cd pod && make tex  && <process the latex files>) 
#   You want to run the first of these.
#
# ---------------------------------------------------
#
# Part of standard perl install:
#  cd /usr/include1
#  h2ph *.h */*.h
#
#
# Testing Perl
# ------------
#	perl -MSys::Syslog -e 1
#
#	perl -Ilib utils/h2ph -D -d . /dev/null
#
# -----------------------------------------------------
#
# Maggie:~# cd /usr
# Maggie:/usr# tar zcvf include.tgz include
# Maggie:/usr/include# h2ph *.h */*.h
#	linux/elf.h -> linux/elf.ph
#	linux/elfcore.h -> linux/elfcore.ph
#	linux/errno.h -> linux/errno.ph
#	linux/etherdevice.h -> linux/etherdevice.ph
#	linux/ext2_fs.h -> linux/ext2_fs.ph
#
#
# end of file